Coretemp v1.0 rc4
+4
Tigrou
nico44z
Remuald
robin44
8 participants
Page 1 sur 2
Page 1 sur 2 • 1, 2
Coretemp v1.0 rc4
Core Temp vient d'être mis à jour en version 0.99 et corrige de nombreux bugs, notamment sur la reconnaissance des CPU AMD et de la gestion du G15 de Logitech.
Du côté de chez Intel, les Core 2 Duo de la série E7000 sont désormais supportés ainsi que les Atom Silverthorne, même si ce dernier point semble en cours d'amélioration.
DL: http://www.alcpu.com/CoreTemp/
robin44- Modérateur
- Nombre de messages : 6577
Localisation : Missillac
Re: Coretemp v1.0 rc4
le plugin G15 est gérer depuis la version 0.97
perso je trouve le nouveau beaucoup moins bien
perso je trouve le nouveau beaucoup moins bien
Remuald- Coadmin
- Nombre de messages : 31630
Localisation : anywhere
Re: Coretemp v1.0 rc4
moins bien a quel niveau ?
nico44z- Coadmin
- Nombre de messages : 19973
Localisation : saint seb
Re: Coretemp v1.0 rc4
il se trouve que la police est minuscule au départ, mais réglable par un fichier ini modifiable, pour ma part, le programme ne s'est lancé qu'une seule fois sur mon G15 puis a disparu et plus moyen de le remettre sauf en redémarrant Coretemp
Remuald- Coadmin
- Nombre de messages : 31630
Localisation : anywhere
Re: Coretemp v1.0 rc4
coretemp 0.99.3 out + ajout de la photo du soft dans le 1er post.
nico44z- Coadmin
- Nombre de messages : 19973
Localisation : saint seb
Re: Coretemp v1.0 rc4
toujours très utile ce soft
Remuald- Coadmin
- Nombre de messages : 31630
Localisation : anywhere
Re: Coretemp v1.0 rc4
dans la dernière version la temp des procs 45nm est corrigé.
nico44z- Coadmin
- Nombre de messages : 19973
Localisation : saint seb
Re: Coretemp v1.0 rc4
pour ceux qui possède vista, il existe aussi Real Temp :
http://www.techpowerup.com/realtemp/
http://www.techpowerup.com/realtemp/
Remuald- Coadmin
- Nombre de messages : 31630
Localisation : anywhere
Re: Coretemp v1.0 rc4
pourquoi realtemp fonctionne pas sous xp ?
nico44z- Coadmin
- Nombre de messages : 19973
Localisation : saint seb
Re: Coretemp v1.0 rc4
si aussi 64bits et 32bits
Remuald- Coadmin
- Nombre de messages : 31630
Localisation : anywhere
Re: Coretemp v1.0 rc4
il serait intéressant de comparer sur un proco 45nm realtemp et coretemp car la derniere version de coretemp a rectifié les tjmax d'apres les docs intel.A voir si l'écart de 10° reste toujours présent.
nico44z- Coadmin
- Nombre de messages : 19973
Localisation : saint seb
Re: Coretemp v1.0 rc4
un utilitaire qui fasse monitoring des T° CPU & GPU en graph + possibilité de modder la vitesse des ventilos, ça existe ?
je connaissais pas Real Temp, je vais tester, mais il doit bien exister un tout-en-un... ça m'arrangerait surtout !
je connaissais pas Real Temp, je vais tester, mais il doit bien exister un tout-en-un... ça m'arrangerait surtout !
Tigrou- NHFR member
- Nombre de messages : 1055
Localisation : Saint-Etienne de Montluc
Re: Coretemp v1.0 rc4
bein tu peux utiliser ati tool + speedfan + real temp
sinon je vois pas
sinon je vois pas
Dernière édition par Remuald le Lun 1 Sep 2008 - 15:51, édité 1 fois
Remuald- Coadmin
- Nombre de messages : 31630
Localisation : anywhere
Re: Coretemp v1.0 rc4
speedfan ?
berlo- Gold Member
- Nombre de messages : 645
Localisation : St Jean de Boiseau
Re: Coretemp v1.0 rc4
oups oui j'ai corrigé
Remuald- Coadmin
- Nombre de messages : 31630
Localisation : anywhere
Re: Coretemp v1.0 rc4
je vais tester ce coretemp et realtemp sur le E7200 pour voir
culex44- NHFR All Stars
- Nombre de messages : 6612
Localisation : Lille
Re: Coretemp v1.0 rc4
bon allons-y, pareil je vais essayer
merci pour les infos les gaziers
merci pour les infos les gaziers
Tigrou- NHFR member
- Nombre de messages : 1055
Localisation : Saint-Etienne de Montluc
Re: Coretemp v1.0 rc4
version 0.99.4 dispo
attention les versions 32 et 64 sont séparés now.
attention les versions 32 et 64 sont séparés now.
nico44z- Coadmin
- Nombre de messages : 19973
Localisation : saint seb
Re: Coretemp v1.0 rc4
Toujours le même problème avec cette version, mon VID est faussé: 1.1625V
robin44- Modérateur
- Nombre de messages : 6577
Localisation : Missillac
Re: Coretemp v1.0 rc4
coretemp 0.99.5.26 dispo
changelog:
Fix: Incorrect clock speeds reported on some systems.
- Fix: At startup Core Temp shows 0 (?) or 21 (?) on AMD K8 series.
- Fix: Turion MK series recognition was wrong.
- Fix: Properly detect Atom and Core i7 engineering samples.
- Fix: Tri-Core AMD CPUs incorrectly shown as having only 2 cores and 2 threads in 64bit Core Temp binary.
- Fix: System tray text was off center.
- Fix: Penryn (mobile Core 2) processors reported as having 85C TjMax instead of 90C.
- Fix: Settings window would open centered, and sometimes out of the desktop area.
- Fix: System tray icon very small in Windows 2000/XP/2003.
- Fix: AMD Athlon X2 4x50e series detected as 3x50e.
- Fix: Using a negative offset on AMD systems results in "42949672xx°C" being displayed.
- Fix: Add support for Mobile Athlon 64 X2 TK-xx series and Turion 64 MK-xx series.
- Fix: Workaround added for when Core Temp fails to find supported CPUs on Phenom based systems.
- Fix: PROCHOT signal from Intel CPUs was not picked up correctly.
- Fix: Core Temp would start out of the desktop area, and the main Window couldn't be seen/accessed.
- Fix: False overheating warning on AMD systems.
- Fix: False readings of over 200C° on AMD systems.
- Fix: High/low temperatures would be reversed when "Show distance to TjMax" was enabled.
- Fix: Clicking "Defaults" button in settings would enable logging when it should be disabled by default.
- Fix: 23xx and 83xx series AMD Opterons recognized as 83xx and 23xx respectively.
- Fix: System tray icons appear incorrectly on AMD K10 and newer CPUs.
- Fix: "Show highest temp of each CPU" systemtray icon configuration sometimes reports duplicate readings.
- Fix: G15 applet did not work after resuming from Sleep/Suspend.
- Add: Completely new code for processor speed detection.
- Add: A comprehensive processor information window (F3 or Tools --> System information).
- Add: Thermal protection mechanism. (Look at Options menu, changed from 0.99.5.20 beta)
- Add: Support for the latest AMD and Intel CPUs.
- Add: Mini mode for GUI. (Double click anywhere to switch between modes)
- Add: Per core temperature offset adjustment. (Look at Options menu)
- Add: Screenshots are now taken in the lossless but very compact PNG format.
- Add: User defined text colors for main Window. (Options --> Settings)
- Add: Show high/low temperatures. (Press F6 or the Tools menu to reset values)
- Add: On/Off switch for G15 applet in Tools menu.
- Add: Running several instances of Core Temp is now possible (enable in Settings).
- Change: Temp turns Orange when temperature is over TControl, and Red when CPU is thottling/critical.
- Change: Reorganized menu.
- Change: TjMax for mobile Atom processors changed to 90C.
- Change: "Lion" codename for AMD Turion was changed to "Griffin".
- Change: Completely dropped support for older Windows NT OS, Windows XP or up is required.
(For Windows 2000: download GDIPlus.dll here http://www.dll-files.com/dllindex/dll-files.shtml?gdiplus)
changelog:
Fix: Incorrect clock speeds reported on some systems.
- Fix: At startup Core Temp shows 0 (?) or 21 (?) on AMD K8 series.
- Fix: Turion MK series recognition was wrong.
- Fix: Properly detect Atom and Core i7 engineering samples.
- Fix: Tri-Core AMD CPUs incorrectly shown as having only 2 cores and 2 threads in 64bit Core Temp binary.
- Fix: System tray text was off center.
- Fix: Penryn (mobile Core 2) processors reported as having 85C TjMax instead of 90C.
- Fix: Settings window would open centered, and sometimes out of the desktop area.
- Fix: System tray icon very small in Windows 2000/XP/2003.
- Fix: AMD Athlon X2 4x50e series detected as 3x50e.
- Fix: Using a negative offset on AMD systems results in "42949672xx°C" being displayed.
- Fix: Add support for Mobile Athlon 64 X2 TK-xx series and Turion 64 MK-xx series.
- Fix: Workaround added for when Core Temp fails to find supported CPUs on Phenom based systems.
- Fix: PROCHOT signal from Intel CPUs was not picked up correctly.
- Fix: Core Temp would start out of the desktop area, and the main Window couldn't be seen/accessed.
- Fix: False overheating warning on AMD systems.
- Fix: False readings of over 200C° on AMD systems.
- Fix: High/low temperatures would be reversed when "Show distance to TjMax" was enabled.
- Fix: Clicking "Defaults" button in settings would enable logging when it should be disabled by default.
- Fix: 23xx and 83xx series AMD Opterons recognized as 83xx and 23xx respectively.
- Fix: System tray icons appear incorrectly on AMD K10 and newer CPUs.
- Fix: "Show highest temp of each CPU" systemtray icon configuration sometimes reports duplicate readings.
- Fix: G15 applet did not work after resuming from Sleep/Suspend.
- Add: Completely new code for processor speed detection.
- Add: A comprehensive processor information window (F3 or Tools --> System information).
- Add: Thermal protection mechanism. (Look at Options menu, changed from 0.99.5.20 beta)
- Add: Support for the latest AMD and Intel CPUs.
- Add: Mini mode for GUI. (Double click anywhere to switch between modes)
- Add: Per core temperature offset adjustment. (Look at Options menu)
- Add: Screenshots are now taken in the lossless but very compact PNG format.
- Add: User defined text colors for main Window. (Options --> Settings)
- Add: Show high/low temperatures. (Press F6 or the Tools menu to reset values)
- Add: On/Off switch for G15 applet in Tools menu.
- Add: Running several instances of Core Temp is now possible (enable in Settings).
- Change: Temp turns Orange when temperature is over TControl, and Red when CPU is thottling/critical.
- Change: Reorganized menu.
- Change: TjMax for mobile Atom processors changed to 90C.
- Change: "Lion" codename for AMD Turion was changed to "Griffin".
- Change: Completely dropped support for older Windows NT OS, Windows XP or up is required.
(For Windows 2000: download GDIPlus.dll here http://www.dll-files.com/dllindex/dll-files.shtml?gdiplus)
nico44z- Coadmin
- Nombre de messages : 19973
Localisation : saint seb
Re: Coretemp v1.0 rc4
la version 1 est très proche
Remuald- Coadmin
- Nombre de messages : 31630
Localisation : anywhere
Re: Coretemp v1.0 rc4
Version 0.99.6.1 dispo:
- Fix: Overheating protection.
- Fix: Incorrect detection of some Intel and AMD processors.
- Fix: Layout problems with AMD Phenom series and newer processors.
- Known issues: Intel processor speed detection displays extremely high numbers.
- Fix: Overheating protection.
- Fix: Incorrect detection of some Intel and AMD processors.
- Fix: Layout problems with AMD Phenom series and newer processors.
- Known issues: Intel processor speed detection displays extremely high numbers.
nico44z- Coadmin
- Nombre de messages : 19973
Localisation : saint seb
Re: Coretemp v1.0 rc4
version 0.99.7 dispo
changelog:
- New: Implemented Windows 7 taskbar button features. (Under the Options menu)
- New: Clock modulation detection for Intel processors.
- New: Proper support the Phenom II X6 and Athlon L100 series.
- New: Support for the E3000 Celeron series.
- New: Displays the processor's manufacturing process. (Lithography)
- Fix: Intel frequency detection.
- Fix: Frequency doesn't update after exiting from Sleep or Hibernation. (Intel)
- Fix: Reading and logging intervals in Settings can't be changed.
- Fix: Minor Intel processor recognition issues.
- Fix: On some systems the System Information window would flood the screen with errors.
- Fix: G15 plugin restarts after resuming from sleep even if it was previously disabled from the menu.
- Fix: Overheating protection on AMD processors bug.
- Update: Rearranged the main GUI and added new information.
- Update: Added missing Intel Socket names.
changelog:
- New: Implemented Windows 7 taskbar button features. (Under the Options menu)
- New: Clock modulation detection for Intel processors.
- New: Proper support the Phenom II X6 and Athlon L100 series.
- New: Support for the E3000 Celeron series.
- New: Displays the processor's manufacturing process. (Lithography)
- Fix: Intel frequency detection.
- Fix: Frequency doesn't update after exiting from Sleep or Hibernation. (Intel)
- Fix: Reading and logging intervals in Settings can't be changed.
- Fix: Minor Intel processor recognition issues.
- Fix: On some systems the System Information window would flood the screen with errors.
- Fix: G15 plugin restarts after resuming from sleep even if it was previously disabled from the menu.
- Fix: Overheating protection on AMD processors bug.
- Update: Rearranged the main GUI and added new information.
- Update: Added missing Intel Socket names.
nico44z- Coadmin
- Nombre de messages : 19973
Localisation : saint seb
Re: Coretemp v1.0 rc4
que de bonnes features
Remuald- Coadmin
- Nombre de messages : 31630
Localisation : anywhere
Re: Coretemp v1.0 rc4
moi ma frek de I7 est enfin correcte.
avant si je changeai de coeff c'etait marqué 12
avant si je changeai de coeff c'etait marqué 12
nico44z- Coadmin
- Nombre de messages : 19973
Localisation : saint seb
Page 1 sur 2 • 1, 2
Page 1 sur 2
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum